Cisco TelePresence IX5200 First-Time Setup

14
Cisco TelePresence IX5000 and IX5200 First-Time Setup
OL-27038-01
Requirements for Whiteboards and Whiteboard Microphones
• Good lighting improves the whiteboard image; poorly lit whiteboard areas can look grainy when
shared in a conference.
Figure 4 Examples of Correct and Incorrect Whiteboard Placement
Troubleshooting Whiteboard Setup Issues
If you encounter any problems with the whiteboard setup, check the following possible causes:
• There is not enough contrast between the targets and the viewable area in the camera, due to poor
lighting in the whiteboard area. Ideally, the lux level in the whiteboard area should be the same level
as the rest of the room. If the whiteboard is placed in a dark corner of the room, not only can
whiteboard setup fail, but the whiteboard can look dark and grainy when it is shared, even if
whiteboard setup passes.
If you cannot fix the lighting, you can light the whiteboard area temporarily with an external lighting
source until first-time setup passes. However, note that a poorly lit whiteboard area looks poorly lit
when it is shared.
• Something in the viewable camera area (for example, red ink on the whiteboard) is causing detection
issues between the whiteboard targets, which are red in color, and the whiteboard.

Cisco TelePresence IX5200 Specifications

General

Brand	Cisco
Model	TelePresence IX5200
Category	Conference System
Language	English