Cisco TelePresence IX5200 First-Time Setup

15
Cisco TelePresence IX5000 and IX5200 First-Time Setup
OL-27038-01
Performing First-Time Setup
This problem is unlikely because to interfere with camera setup, the source of the interference would
have to be both red and rectangular in shape.
Performing First-Time Setup
To set up your system for the first time, complete the following steps.
Step 1 Log in to the IX5000 administration GUI using the following syntax:
http://<ip-address>
Where
ip-address is the IP address you noted when the system was booting (see Figure 2 for an example).
Tip If you did not make a note of the IP address and it no longer appears on the display, tap the number that
displays on the top left corner of the Touch 10 controller, then tap System Info.
Step 2 Click First-Time Setup from the menu on the left.
Step 3 Click Start Setup.

Cisco TelePresence IX5200 Specifications

General

Brand	Cisco
Model	TelePresence IX5200
Category	Conference System
Language	English