Cisco UCS C200 M2 User Manual

Cisco UCS C200 M2 High-Density SFF Drive Rack-Mount Server
CONFIGURING the SERVER
31
STEP 11 ORDER OPTIONAL TOOL-LESS RAIL KIT
A rail kit is not included with the Cisco UCS C200 M2 base server chassis, but you can order the
tool-less rail kit listed in
Table 13.
See the section titled OPTIONAL STEP - ORDER RACK(s), page 42 for information about racks
and rack equipment.
Table 13 Rail Kit
Product ID (PID) PID Description
R2XX-G31032RAIL UCS C200, C210 Rack Server Rail Kit
NOTE: This third-generation rail kit works in racks with square holes or 10-32 round
holes and is shorter than the previous generation rail kit. The new R2XX-G31032RAIL
measures 23.5 inches to 36 inches in length. By comparison, the previous version,
R250-SLDRAIL, measured 27 inches to 37 inches in length.

Cisco UCS C200 M2 Specifications

General

Tcase	76 °C
Bus type	QPI
Stepping	D0
FSB Parity	No
Processor code	SLBF8
Processor cache	4 MB
Processor cores	4
Processor model	E5506
System bus rate	4.8 GT/s
Processor series	Intel Xeon 5500 Series
Processor socket	Socket B (LGA 1366)
Processor codename	Nehalem EP
Motherboard chipset	-
Processor frequency	2.13 GHz
Processor cache type	Smart Cache
Processor lithography	45 nm
Processor system type	DP
Processor manufacturer	Intel
Processor package size	42.5 x 45 mm
Processor front side bus	- MHz
Processor operating modes	64-bit
ECC supported by processor	Yes
Thermal Design Power (TDP)	80 W
Number of processors installed	1
CPU multiplier (bus/core ratio)	16
Maximum number of SMP processors	2
Memory types supported by processor	DDR3-SDRAM
Memory channels supported by processor	Triple
Memory clock speeds supported by processor	800 MHz
Memory bandwidth supported by processor (max)	19.2 GB/s
Maximum internal memory supported by processor	144 GB
HDD size	- \
RAID levels	0, 1
Optical drive type	DVD-RW
Total storage capacity	0 GB
Maximum storage capacity	0 TB
Number of HDDs installed	0
Internal memory	4 GB
Maximum internal memory	96 GB
Memory layout (slots x size)	1 x 4 GB
Graphics card	G200
Networking features	Gigabit Ethernet
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Power supply	650 W
Power requirements	AC 120/230 V, 50/60 Hz
Chassis type	Rack (1U)
Processor ARK ID	37096

Weight and Dimensions

Depth	706.1 mm
Width	429.3 mm
Height	43 mm