Cisco UCS C200 M2 High-Density SFF Drive Rack-Mount Server
56
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
Dimensions and Weight
Power Specifications
The general power specifications for the C200 M2 SFF server are listed in Tab le 28.
Table 27 UCS C200 M2 Dimensions and Weight
1
1. The system weight given here is an estimate for a fully configured system and will vary depending on the
number of peripheral devices and power supplies.
Parameter Value
Height 1.7 in. (4.32 cm)
Width 16.92 in.(43.0 cm)
Depth 27.8 in. (70.60 cm)
Front Clearance 3 in. (76 mm)
Side Clearance 1 in. (25 mm)
Rear Clearance 6 in. (152 mm)
Weight
33.00 lbs (14.97 kg)
*
Table 28 UCS C200 M2 SFF Power Specifications
Description Specification
AC input voltage 100 to 127 VAC nominal (Range: 90 to 264 VAC)
AC input frequency 50 to 60 Hz nominal (Range: 47 to 63 Hz)
Maximum AC input current 8 A at 100 VAC
Maximum AC inrush current 30 A peak sub-cycle duration
Maximum output power for each
power supply
650 W
Power supply output voltage Main power: 12 VDC
Standby Power: 5 VDC
Power supply efficiency 92% Peak, complies with 80Plus Gold Standard
NOTE: AC input connector is an IEC 320 C-14 15A/250VAC power inlet.