Cisco UCS C200 User Manual

2-2
Cisco UCS C200 Server Installation and Service Guide
OL-20732-02
Chapter 2 Installing the Server
Unpacking and Inspecting the Server
Unpacking and Inspecting the Server
Tip Keep the shipping container in case the server requires shipping in the future.
Note The chassis is thoroughly inspected before shipment. If any damage occurred during transportation or
any items are missing, contact your customer service representative immediately.
To inspect the shipment, follow these steps:
Step 1 Remove the server from its cardboard container—save all packaging material.
Step 2 Compare the shipment to the equipment list provided by your customer service representative and
Figure 2-1. Verify that you have all items.
Step 3 Check for damage and report any discrepancies or damage to your customer service representative. Have
the following information ready:
• Invoice number of shipper (see the packing slip)
• Model and serial number of the damaged unit
• Description of damage
• Effect of damage on the installation
Figure 2-1 Shipping Box Contents
1 Server 4 Documentation
2 Drivers and Utilities disc 5 KVM cable
3 Power cord (up to two) 6 C200 SFF server only:
Two SAS cables (R200-SASCBL)
Cisco
Nexus 1010
Cisco
UCS C-Series
Cisco
UCS C-Series
1 2
3
4
5 6
197002
Console
Reset
PSU
MEM
CPU
UCS C200

Cisco UCS C200 Specifications

General

Brand	Cisco
Model	UCS C200
Category	Server
Language	English