Cisco UCS C22 User Manual

C-7
Cisco UCS C22 Server Installation and Service Guide
OL-26646-01
Appendix C RAID Controller Considerations
Embedded RAID Controller
Installing a SCU Upgrade ROM Module For Embedded RAID SAS Support
The SCU Upgrade ROM module contains a chip on a small circuit board. This module attaches to a
motherboard header. This chip adds SAS support for up to eight drives.
To install a SCU upgrade ROM module, follow these steps:
Step 1 Locate the header (see Figure C-1).
Step 2 Align the connector on the SCU upgrade ROM module with the pins on the header, then gently push the
connector onto the pins.
Step 3 Replace the top cover.
Step 4 Replace the server in the rack, replace cables, and then power on by pressing the Power button.
Step 5 Continue with either Installing a Software Key Module for Embedded RAID 5 Support, page C-8 or
Enabling the Embedded RAID Controller in the BIOS, page C-8.
Figure C-1 SCU Upgrade ROM and RAID 5 Key Header Locations on Motherboard
1 SCU upgrade ROM header 2 Software RAID 5 key header
PCIe 1
PCIe 2
SYS FAN2
SYS FAN2
SYS FAN3
SYS FAN3
SYS FAN4
SYS FAN4
SYS FAN5
SYS FAN5
SYS FAN6
SYS FAN6
SYS FAN1
SYS FAN2
SYS FAN3
SYS FAN4
CPU 1
CPU 2
SYS FAN5
21
343731

Cisco UCS C22 Specifications

General

Brand	Cisco
Model	UCS C22
Category	Server
Language	English