Cisco UCS E Series Troubleshooting Guide

DETAILED STEPS
Step 1
Restart your browser, and try again.
Step 2
Make sure that the Java version that is installed is at least 6.0.
Step 3
If this does not resolve the problem, clear the Java cache from the Java control panel.
Cannot Launch Broadcom FCOE Configuration
If Broadcom FCOE configuration does not launch when you press CTRl-S, reboot the E-Series Server and
try again. For more information about configuring FCOE, see Broadcom NetXtreme II Network Adapter User
Guide
Storage Troubleshooting
The RAID feature is applicable to E-Series Servers and the SM E-Series NCE. The RAID feature is not
applicable to the EHWIC E-Series NCE.
Note
Error Message: LSI OpROM: Battery Status: Not Present
Ignore this message.
Viewing Storage Event Logs
This procedure is applicable to E-Series Servers and the SM E-Series NCE. This procedure is not applicable
to the EHWIC E-Series NCE.
Note
To view storage event logs, do the following from the CIMC GUI.
SUMMARY STEPS
1.
In the Navigation pane, click the Admin tab.
2.
On the Admin tab, click CIMC Log. The CIMC Log page appears.
3.
In the Source column, look for the logs that begin with BMC:storage.
Troubleshooting Guide for Cisco UCS E-Series Servers and the Cisco UCS E-Series Network Compute Engine
19
Overview
Storage Troubleshooting

Cisco UCS E Series Specifications

General

Brand	Cisco
Model	UCS E Series
Category	Server
Language	English