2-2
Cisco CSS UCS Platform Series User Guide, KIN-UCSM5-1RU-K9 / KIN-UCSM5-2RU-K9
Chapter 2 Supported Applications
Cisco Video Surveillance Manager, Release 7.11.1 and Higher
See the Installing the Server, page 1-4.
Step 2 Complete the initial server setup.
• KIN-UCSM5-1RU-K9: Initial Serer Setup
• KIN-UCSM5-2RU-K9: Initial Server Setup
Step 3 Use the browser-based Cisco Video Surveillance Management Console to complete the initial server
setup for the Cisco Video Surveillance Manager.
See the Cisco Video Surveillance Management Console Administration Guide.
Step 4 Use the browser-based Cisco Video Surveillance Operations Manager to configure additional server
options and Cisco VSM features.
See the Cisco Video Surveillance Operations Manager User Guide.
Upgrading the Cisco VSM System Software
To to update the Cisco VSM system software, use the browser-based Cisco VSM Operations Manager
or Cisco VSM Management Console to install the upgrade file that contains all required packages and
components.
See the Cisco Video Surveillance Manager: Install and Upgrade Guide for your release.
Recovering the Cisco VSM System Software
To create a bootable USB flash drive that can be used to recover an installation or perform a factory
installation of Cisco VSM 7.
See the Cisco Video Surveillance Manager: Install and Upgrade Guide for your release.
The recovery options include the following:
Ta b l e 2-1 Recovery Options
Option Description
recovery Reinstalls the operating system.
• Recorded video is preserved.
• RAID configurations are preserved (only the OS partitions are
formatted).
factory Restores the server to the factory default settings:
• Reinstalls the operating system.
• Clears and reconfigures the RAID. You must disconnect any external
storage before using this option.
• Recorded video and configurations are deleted.
• RAID-6 is configured on the Cisco CSS UCSM5 2RU server.
Caution This action deletes all data and video files.
To Next Page
Loading...
Need help?
General
