EasyManuals Logo

CITROEN C3 Handbook

CITROEN C3
450 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #243 background imageLoading...
Page #243 background image
241
8
In the event of a breakdown
B618_en_Chap08_En-cas-de-panne_ed01-2016
To replace a fuse, you must:
F use the special tweezer to extract the fuse
from its housing and check the condition of
its filament.
F always replace the failed fuse with a fuse
of the same rating (same colour); using a
different rating could cause faults (risk of
fire).
If the fuse fails again soon after replacement,
have the vehicle's electrical system checked by
a CITROËN dealer or a qualified workshop.
Good Failed
The replacement of a fuse not shown in
the tables below may cause a serious
malfunction of your vehicle. Contact
a CITROËN dealer or a qualified
workshop.
Tweezer
Changing a fuse
Changing a fuse
Before changing a fuse:
F the cause of the failure must be identified
and rectified,
F all electrical consumers must be switched
off,
F the vehicle must be immobilised with the
ignition off,
F identify the failed fuse using the tables and
layout drawings in the following pages.
The extraction tweezer is fitted to the back of
the cover of the dashboard fuseboxes.
Access to the tools
F Unclip the cover by pulling at the top left,
then right.
F Disengage the cover completely and turn it
over,
F Remove the tweezer from the back of the
cover.

Table of Contents

Other manuals for CITROEN C3

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the CITROEN C3 and is the answer not in the manual?

CITROEN C3 Specifications

General IconGeneral
BrandCITROEN
ModelC3
CategoryAutomobile
LanguageEnglish

Related product manuals