205
Practical information
Fitting a wheel
After changing a wheel
To store the punctured wheel in the
boot correctly, first remove the central
cover.
When using the "space-saver" type
temporary-use spare wheel, do not
exceed 50 mph (80 km/h).
Have the tightening of the bolts and the
pressure of the spare wheel checked
by a CITROËN dealer or a qualified
workshop without delay.
Have the punctured wheel repaired and
replace it on the vehicle as soon as
possible.
Do not drive with more than one
temporary-use spare wheel fitted to the
vehicle at one time.
List of operations
) Put the wheel in place on the hub.
) Screw in the bolts by hand.
) Pre-tighten the security bolt (if your vehicle
is fitted with them) using the wheelbrace 1
fitted with the socket 4 .
) Pre-tighten the other bolts using the
wheelbrace 1 only.
To Next Page
Loading...
Need help?
General
