CITROEN DS3 User Manual

) On the front bumper, unclip the cover by
pressing at the bottom.
) Screw the towing eye in fully.
) Install the towing bar.
) Place the gear lever in neutral (position N
for an SensoDrive or automatic gearbox).
) On the rear bumper, unclip the cover by
pressing at the bottom.
) Screw the towing eye in fully.
) Install the towing bar.
) Switch on the hazard warning lamps on
both vehicles.
) Move off gently and drive for a short
distance only.
Towing your vehicle Towing another vehicle
Failure to observe this special condition
could result in damage to certain
components (braking, transmission...)
and the absence of braking assistance
the next time the engine is started.
) Unlock the steering by turning the key one
notch in the ignition switch and release the
parking brake.
) Switch on the hazard warning lamps on
both vehicles.
) Move off gently and drive for a short
distance only.

CITROEN DS3 Specifications

General

Brand	CITROEN
Model	DS3
Category	Automobile
Language	English