Basic
Operations
*Once selected, the preferred display becomes
the display default When a function adjustment
such as
volume
is made,
the
screen
will
momentarily switch to that function's display,
then revert back to the preferred display sev-
eral seconds after the adjustment
*When you have entered a title
in
a
CD,
it ap-
pears
in
the sub display If you have not en-
tered a title,
"NO-TTL" appears
in
the title dis-
play instead For information
on
how to enter a
title, refer to the subsection
"Entering
titles"
in
the
"Other
Handy
Functions"
*
You
can adjust the way of scrolling a title For
the
details
on it,
refer
to
the
subsection
"Adjusting
the
way
of
scrolling"
in
the "Other
Handy
Functions"
Setting the Z-enhancer
This unit comes with 3 types of sound tone effects
stored
in
memory Select the one you prefer
*The factory default setting is "OFF"
Each time you press Z-EHCR button
[gJ,
the tone
effect changes
in
the following order
"Z-EHCR 1"
~
"Z-EHCR 2"
~
"Z-EHCR 3"
~
"OFF"
~
"Z-EHCR 1"
• Z-EHCR 1 bass emphasized
• Z-EHCR 2 : treble emphasized
• Z-EHCR 3 : bass and treble emphasized
• OFF no sound effect
Adjusting
the tone
Press A-M button
~
and select the item to ad-
just Each time you press A-M button
~,
the item
changes
in
the following order
• When
the
Z-enhancer
is
off
"BASS"
~
"TREB"
~
"BAL"
~
"FAD"
~
Function mode
•
When
Z-enhancer
1, 2
or
3
is
set
"Z-EHCR"
~
"BAL"
~
"FAD"
~
Function
mode
Adjusting
the
bass
1 Press A-M button
~
and select "BASS"
2 Press Up button
IITI
to emphasize the bass,
or press Down button
I1ID
to attenuate the bass
*The factory default setting is "0" (Adjustment
range:
-6
to +6)
3 When the adjustment is complete, press A-M
button
~
several times until the function mode
is reached
10
ADX5655z
Adjusting
the treble
1 Press A-M button
~
and select "TREB"
2 Press Up button
IITI
to emphasize the treble,
or press Down button
I1ID
to attenuate the
treble
*The factory default setting
is
"0" (Adjustment
range:
-6
to +6)
3 When the adjustment is complete, press A-M
button
~
several times until the function mode
is reached
Adjusting
the balance
1 Press A-M button
~
and select
"BAL"
2 Press Up button
IITI
to emphasize the sound
from the right speaker, or press Down button
I1ID
to emphasizes the sound from the left
speaker
*The factory default setting is "0" (Adjustment
range: L13 to R13)
3 When the adjustment is complete, press A-M
button
~
several times until the function mode
is reached
Adjusting
the fader
1 Press A-M button
~
and select "FAD"
2 Press Up button
IITI
to emphasize the sound
from the front speakers, or press Down but-
ton
I1!l
to emphasize the sound from the rear
speakers
*The factory default setting is "0" (Adjustment
range: F12 to R12)
3 When the adjustment is complete, press A-M
button
~
several times until the function mode
is reached
Adjusting
the Z-enhancer
1 Press Z-EHCR button
[gJ
and select the Z-
enhancer mode
(1
to
3)
to adjust
2 Press A-M button
~
and select "Z-EHCR"
3 Press Up button
IITI
or press Down button
I1!l
to adjusts Z-enhancer
*When Z-enhancer 1 is selected, you can adjust
the bass
in
the range of ±2
*When Z-enhancer 2
is
selected, you can adjust
the treble
in
the range of ±2
*When Z-enhancer 3 is selected, you can adjust
the bass and treble
in
the range of ±2
4 When the adjustment is complete, press A-M
button
~
several times until the function mode
is reached
To Next Page
Loading...
Need help?
General
