Clarion ARX7370R User Manual

Other Handy Functions
Anti-theft indicator
The red Anti-Theft Indicator is a mean of pre-
venting theft. This indicator can be flashed when
DCP is removed from the unit.
* The factory setting is “OFF”.
1. Press ADJ button [15].
2. Select left or right to until “BLINK-LED” is dis-
played using a-selector [2].
Ti Thty
AL. Ln
3. Select up or down to select “ON” or “OFF” us-
ing a-selector [2].
4. Press ADJ button [15] to return to the previous
display.
Dimmer function
This function dims the display illumination when
the car’s instrument panel illumination is turned
on or when inside the car gets dark at night.
* The dimmer level of the display illumination can
be set by “Setting the dimmer level”.
Each time you press No.1 of the Direct buttons [12]
while pressing and holding DISP button [6], the dim-
mer toggles between “AUTO”, “OFF” and “ON”.
* The factory setting is “AUTO”.
@AUTO:
The dimmer is turned on according to the bright-
ness inside the car.
@ON:
The dimmer is turned on when the car's instru-
ment panel illumination is turned on.
@OFF:
The dimmer is turned off and the display is illu-
minated at the usual level.
* When the dimmer level is set to “ON”, connect the
illumination lead of the unit and that of the car.
Setting the dimmer level
The dimmer level of the display illumination can
be set.
* The dimmer level can be set from 1 to 5 and the
factory setting is 3.
1. Press ADJ button [15].
2. Select left or right to select until “DIMM LEVEL”
is displayed using a-selector [2].
COE]
CWE
Lev Gl
Tl T wat wat
Ar (
3. Select up or down to set a level from 1 to 5
using a-selector [2].
4. Press ADJ button [15] to return to the previous
mode display.
Message display
When the player is powered on or off, a small dot
matrix readout (graphic indication) scrolls a
friendly salutation across the electronic bulletin
board. When you can enter the operation mode,
the operation status will be graphically displayed.
The user can turn this message function on and
off.
* The factory setting is “ON”.
* The message switches in random order.
1. Press ADJ button [15].
2. Select left or right to select until “MESSAGE”
is displayed using a-selector [2].
Me TCE
Ph oO
57
3. Select up or down to select “ON” or “OFF” us-
ing a-selector [2].
4. Press ADJ button [15] to return to the previous
mode display.
ARX7370R/ARX7370RW 23

Clarion ARX7370R Specifications

General

Brand	Clarion
Model	ARX7370R
Category	Cassette Player
Language	English