Clarion ARX7370R User Manual

Other Handy Functions
Cellular input
When the unit is connected to a cellular telephone
via cable sold separately, the voice from the tele-
phone can be heard from the speaker of unit.
Each time you press No.5 of the Direct buttons
[12] while holding down BAND button [11], the cel-
lular input toggles between “TEL SP-R’,
“TEL SP-L’, “TEL MUTE” and “TEL OFF”.
* The factory setting is “TEL OFF”.
@TEL SP-R:
Even if the power is turned on or off to the main
unit, sound is heard from the front right speaker.
@TEL SP-L:
Even if the power is turned on or off to the main
unit, sound is heard from the front left speaker.
@TEL MUTE:
The sound of the unit is muted when the tele-
phone is used.
@TEL OFF:
The sound of the unit is not muted when the tele-
phone is used.
Note:
¢ This function is available only when the phone mute
lead of the unit is connected to the specified lead
of the cellular telephone.
Switching output between non-
fader and subwoofer
The output of the RCA terminal (2ch) on the back
of the unit can be switched.
* The factory setting is Non-Fader output.
Note:
¢ When an expand DSP. expand EQ or other equal-
izer is connected to the unit, Non-Fader output
setting is only available.
1. Press ADJ button [15].
2. Select left or right to select until “NON-F/WOOF”
is displayed using a-selector [2]
3. Select up or down to select “NON-FADER’,
“WOOFER 1”, “WOOFER 2”, “WOOFER 3?” or
“WOOFER 4” using a-selector [2].
@ NON-FADER:
This setting is for connecting a DSP or equalizer.
@ WOOFER 1 to 4:
This setting is for connecting an amplifier for
subwoofer.
* Woofer 1 to 4 indicate the woofer’s volume level.
4. Press ADJ button [15] to return to the previous
mode display.
24 ARX7370R/ARX7370RW
Entering titles
Titles can be given to CDs.
* Up to 72 titles can be entered.
1. Play the CD to which you want to give a title in
the CD changer and press TITLE button [14].
2. Select left or right to move the cursor using
a.-selector [2].
a"
m0 THI T
Mw Wr a
* Up to 10 characters can be entered.
3. Following characters can be entered.
(Capital letters, Numbers, Symbols)
4. Select up or down to select the characters
using a-selector [2].
5. Repeat steps 2, 3 and 4 to enter a title.
* When more than the specified number of titles
are entered, “TITLE FULL’ appears in the display.
6. Push in a-selector [2] for 2 seconds or longer
to store the title. The previous mode display
returns after the title is stored.
TTT) GC waar
i or tl (
Clearing titles
1. Select the CD changer mode and press and
holding TITLE button [14| for 2 seconds or longer.
2. Select up or down to select a title to be cleared
using a-selector [2].
3. Push in a-selector [2] for 2 seconds or longer —
to clear the title. The next title appears. If you
want to clear the next title too, repeat steps 2
and 3.
* When all the stored titles are cleared,
“NO TITLE” appears in the display.
4. After clearing the title, press TITLE button
to return to the previous mode display.

Clarion ARX7370R Specifications

General

Brand	Clarion
Model	ARX7370R
Category	Cassette Player
Language	English