Clarion CZ100A User Manual

23
English
• Connecting to the external amplier
External ampliers can be connected to the 4 channel RCA output connections.
Ensure that the connectors are not grounded or shorted to prevent damage to the
unit.
8) Connecting the accessories
Refer to the right.
Rear audio output (Right)
Subwoofer output 2
Black
Red
Rear Right / SUB OUT 2
Rear audio output (Left)
Subwoofer output 1
Black
White
Rear Left / SUB OUT 1
Black
Black
Steering wheel
control terminal
SWC
4 Channel Amplifier
Red
White
Right
Left
Front audio
output terminal
Gray
Front Right
16-Pin Connector Extension Lead
(attached to the source unit)
Front Left
Rear Right
Rear Left
+ Gray
- Gray/Black
+ White
- White/Black
+ Purple
- Purple/Black
+ Green
- Green/Black
Front Right
Front Left
+ Gray
- Gray/Black
+ White
- White/Black
+ Purple
- Purple/Black
+ Green
- Green/Black
4-Speaker system
or
2-Speaker system
Not used.
Insulate each wire
Yellow wire (Memory back-up lead)
Connect directly to battery
Red wire (Power lead)
Accessory + 12V
Orange/White wire (Illumination lead)
Connect it to the car power supply terminal
for illumination
Blue wire (Auto antenna lead)
Connect it to the car power supply terminal
for antenna
Blue/White wire (Amplifier turn-on lead)
Connect to remote turn-on lead of amplifier
Black wire (Ground lead)
Connect to vehicle chassis ground
Brown wire (Phone mute lead)
Connect to cellular phone mute lead.
ANTENNA
(Black)

Clarion CZ100A Specifications

General

Brand	Clarion
Model	CZ100A
Category	Car Receiver
Language	English