Clarion CZ100E User Manual

English
10
Radio Data System
This unit has a built-in “Radio Data System”
decoder system that supports broadcast
stations transmitting “Radio Data System”
data.
When using the “Radio Data System”
function, always set the radio to FM mode.
AF function
The AF function switches to a different
frequency on the same network in order to
maintain optimum reception.
* The factory default setting is “ON”.
1. Set to ADJ mode by long pressing [DISP]
button.
2. Press the [ ] or [ ] button to select
“AF”.
3. Rotate the knob to select “AF ON” or “AF
OFF”.
 •AFON:
“ AF” in the display lights and AF function
turns on.
 •AFOFF:
“ AF” in the display goes off and AF
function turns off.
REG (Regional programme)
function
When the REG function is ON, the optimum
regional station can be received. When this
function is OFF, if the regional station area
switches as you drive, a regional station for
that region is received.
* The factory default setting is “ON”.
Notes:
• This function is disabled when a national
station such as BBC R2 is being received.
• The REG function ON/OFF setting is valid
when the AF function is ON.
1. Set to ADJ mode by long pressing [DISP]
button.
2. Press the [ ] or [ ] button to select
“REG”.
3. Rotate the knob to select “REG ON” or
“REG OFF”.
Manually tuning a regional station
in the same network
1. This function is valid when the AF function
Radio Data System Operations
is ON and the REG function is OFF.
Note:
• Thisfunctioncanbeusedwhenaregional
broadcastofthesamenetworkisreceived.
TA (Trafc Announcement)
In the TA standby mode, when a trafc
announcement broadcast starts, the trafc
announcement broadcast is received as top
priority regardless of the function mode so
you can listen to it. Trafc programme (TP)
automatic tuning is also possible.
* This function can only be used when
“TP” is lit in the display. When “TP” is lit,
this means that the “Radio Data System”
broadcast station being received has
trafc announcement programmes.
Setting the TA standby mode
If you press the [TA] button, “TA” lights in
the display and the unit is set into the TA
standby mode until a traffic announcement
is broadcast. When a traffic announcement
broadcast starts, “TRAF INF” appears in the
display. If you press the [TA] button while
a traffic announcement broadcast is being
received, the trafc announcement broadcast
reception is cancelled and the unit goes into
the TA standby mode.
Cancelling the TA standby mode
As “TA” lits in the display, press the [TA]
button. The “TA” in the display goes off and
the TA standby mode is cancelled.
PTY (Programme Type)
This function enables you to listen to a
broadcast of the selected programme type
even if the unit is on a function mode other
than radio.
* Some countries do not yet have PTY
broadcast.
* In the TA standby mode, a TP station has
priority over a PTY broadcast station.
Selecting PTY
Press [MENU] button, then rotate the knob
to select PTY type, press the knob, the unit
begin searching.
Downloaded from Caradio-Manual.com Manuals

Clarion CZ100E Specifications

General

Brand	Clarion
Model	CZ100E
Category	Car Receiver
Language	English