Top function
The top function resets the CD player to the
rst track of the disc.
Press and hold the [TOP]
button (2 sec.) to play the rst track (track No.
1) on the disc.
* In case of MP3/WMA, the first track of a
folder being played will be returned.
Other various play functions
Scan play
This function allows you to locate and play
the rst 10 seconds of all the tracks recorded
on a disc.
Press the [SCN] button to perform scan play.
Repeat play
This function allows you to play the current
track repeatedly or play a track currently
being played in the MP3/WMA folder
repeatedly.
CD:
CD/MP3/WMA Operations
1. Press the [RPT] button once or more until
“RPT ON” appears on the LCD to perform
repeat play.
2. Press [RPT] button again to cancel repeat
playback, “RPT OFF” appears on the LCD.
MP3/WMA:
1. Press the [RPT] button to perform repeat
play, “TRACK RPT” appears on the display,
and “RPT” segment lights on.
2. For MP3/WMA files, press [RPT] button
again, “FOLDER RPT” appears on the
display for folder repeat play.
3. Press [RPT] button trice to cancel repeat
playback, “RPT OFF” appears on the
display, and “RPT” segment goes o.
Random play
This function allows you to play all tracks
recorded on a disc in a random order.
Press the [RDM] button to perform random
play.
Press [SRC] button on the panel to select AUX.
AUX is just for Audio content with 3.5mm Jack connector plugged into audio-in socket on the
front panel.
AUX Input sensitivity setting
1. Press the [ADJ] button.
2. Turn the [VOL/SEL] knob to select “AUX MID”.
3. If the output level of connected external audio player is “High”, rotate [VOL/SEL] knob and
choose “AUX LOW”. And if the output level is “Low”,choose “AUX HIGH”.
AUX Operations
Downloaded from Caradio-Manual.com Manuals
To Next Page
Loading...
Need help?
General
