9.
aTHER
OPERATIONS
Adjustment Mode
1.
Press and hold the [0] button for more than 1
second to switch to the adjustment selection
display.
2.
Press the
[1<CI<IIlIl\\lI,1I=>1!J!:::.-1]
button
to
select
the
"item
name".
"CLOCK"
~
"SCRN
SVR"
~"SCROLL"
~
"AUX
SENS"
~
AREA
* Some
of
the items will have
13m
indicator
light
on,
the (
~
II ] button must
be
pressed
to
display
the
setting value.
3.
Turn the [ROTARY] knob to select the
"desired
setting
value"
at left 0 right.
* After completing settings, press the[D] button
to
return
to
the Previous mode.
• Adjusting
clock
setting
2-1. Select "CLOCK".
3-1. Press the [
~
II]
button
3-2. Press
[~
....
,
~]
button to
toggle
HOUR
and MINUTE selection. the HOUR
is
selected
and blinking by default.
3-3. Turn the [ROTARY] knob clockwise to in-
creases hour/minute
or
counterclockwise to
decrease hour/minute.
3-4. Press the
[~II]
button to confirm the clock
setting. The display will show "MEMORY"
to indicate the setting has been stored and
return to "CLOCK".
Note:
-
If
you
remove the vehicle's battery for a check or
repair, the clock will
be
reset,
so
user must set
it
again.
• Turning the screen saver
function
on
or
off
This unit
is
provided with the screen saver func-
tion which allows you to show screen saver
in
the
operation status indication area of the display.
You can turn on and off this function.
If
the button operation is performed with the
screen saver function on, the operation display
corresponding to the button operation is shown
for about 30 seconds and the display returns to
the screen saver display.
* The factory default setting
is
ON".
2-1. Select "SCRN SVR".
3-1. Turn the [ROTARY] knob to select "ON"
or
"OFF".
-ON:
Screen saver
is
enabled.
-OFF:
Screen saver
is
disabled.
• Setting the method
for
title
scroll
Set auto scroll function for
MP3tWMA
title.
* The factory default setting
is
ON".
2-1. Select "SCROLL".
3-1. Turn the [ROTARY] knob to select "ON" or
"OFF".
-ON:
To
scroll automatically.
-OFF:
To
scroll just 1 time when the title was changed.
• Selecting AUX
IN
sensitivity
Make the following settings to select the sensi-
tivity when sounds from external devices con-
nected to this unit are difficult to hear even after
adjusting the volume.
* The factory default setting
is
MID".
2-1. Select "AUX SENS".
3-1. Turn the [ROTARY] knob to select "LOW",
"MID" or "HIGH" at left of right.
- Adjusting
band
change
1.
Press for 5 sec. D buttom and check
in
display
AREA function.
2.- Select this option with [ROTARY] buttom and
select
the
area according at band LATIN 7 ASIA
7 USA 7 EUROPE
21
To Next Page
Loading...
Need help?
General
