.?'
/
OCP
case
..
_.../
DCP Rear Panel
Storing the DCP in the DCP case
Hold the
OCP,
in
the orientation as shown
in
the
figure below, and put it into the supplied
OCP
case. (Ensure the
OCP
is
in
the correct orienta-
tion
.)
Main Unit
Front
• The DCP can easily be damaged
by
impact.
After
removing
it, be careful
not
to
drop
it
or
subject
it
to
strong
shocks.
• When the Release
button
is pressed and
the
DCP is unlocked,
the
car's
vibrations
may cause
it
to
fall.
To
prevent damage
to
the
DCP,
always
store
it
in
its
case after
detaching it. (See
figure
above.)
• The
connector
connecting the main unit and
the
DCP is an extremely
important
part. Be
careful
not
to
damage
it
by
pressing
on
it
with
fingernails, pens, screwdrivers, etc.
Note:
• If the
OCP
is dirty, wipe off the dirt with a soft. dry
cloth only.
• To remove the front panel OCP. is important that
left side should be lift slightly to avoid stucking.
The control panel can
be
detached
to
prevent
theft. When detaching the control panel, store
it
in
the DCP (Detachable Control Panel) case
to
prevent scratches.
We
recommend taking the
OCP
with
you
when
leaving the
car.
* The OCP is unlocked
Removing the DCP
1.
Press the [SRC] button for 1 second or longer
to
switch off the power.
2.
Press
in
the [RELEASE] button.
/,
...
[RELEASE] button
!
~'-~L~l
i~
3.
Remove the
OCP.
Attaching
the DCP
1.
Insert the right side of the DCP into the main
unit.
2.
Insert the left side of the
OCP
to
attach into the
main unit.
8
To Next Page
Loading...
Need help?
General
