6.
DCP (Detachable Control Panel)
Source Unit
Front
/
/
//'
/
OCP
connector
DCP Rear Panel
Note:
ct
If
the OCP
is
dirty, wipe
off
with a soft, dry cloth only
OCP
OCP case
Storing the DCP
in
the DCP Case
Hold the
DCP,
in
the orientation as shown
in
the
figure below, and put it into the supplied DCP
case. (Ensure the DCP
is
in
the correct orienta-
tion.)
• The DCP can easily be damaged
by
shocks.
After
removing it, place
it
in a protective case and be
careful
not
to
drop
it
or
subject
it
to
strong
shocks.
• When the release button is pressed and
the
DCP is
unlocked, the car's vibrations may cause
it
to
fall.
To
prevent damage
to
the
DCP,
always store
it
in a
protective case after detaching it.
• The rear
connector
that connects the source
unit
and the DCP is an extremely
important
part. Be
careful
not
to
damage
it
by pressing on
it
with fin-
gernails, pens, screwdrivers, etc.
Attaching the DCP
1.
Insert the right side of the DCP into the main
unit.
2.
Insert the left side of the DCP into the main
unit.
The OCP
is
unlocked
3.
Remove the
DCP.
Removing the DCP
1.
Press the [FNC] button for 1 second or longer
to switch off the power.
2.
Press
in
the [RELEASE] button.
~
[RELEASE]
button
The control panel can be detached to prevent
theft. When detaching the control panel, store it
in
the DCP (DETACHABLE CONTROL PANEL)
case to prevent scratches.
We recommend taking the DCP with you when
leaving the
car.
08335/08235
7
To Next Page
Loading...
Need help?
General
