8.
OPERATION
Note:
• Be sure
to
read this chapter referring
to
the front diagrams
of
chapter 2. CONTROLS on page 3 (unfold).
Basic Operations
When this unit is turned on, starting and stop-
ping the engine
of
a car with its volume raised
to the maximum level may harm your hearing.
Be careful about
adjusting
the
volume.
Turning
ON
the Power and Adjusting
the
Volume
1)
Press the [FNC] button.
*
To
turn off the power, press the [FNC] button
for 1 second
or
longer.
2)
Press the [FNC] button and select another
operation mode. Every time the [FNC] button
is pressed, the display changes the operation
mode as:
Radio
~
CD
~
Radio
Notes:
•
The
operation mode not connected
to
the unit will not
be selected.
•
If
the CD mode is selected when no disc
is
inserted,
the display
flashes"
NO DISC".
3)
Turning the [ROTARY] knob clockwise
increases the volume; turning it counterclock-
wise decreases the volume.
*The volume level
is
from 0 (minimum) to 33 (max-
imum).
Audio
Mode
Adjustments
Press the [A-M] button to select the adjustment
mode. The mode switches as follows each time
the [A-M] button is pressed:
BASS
~
TREB
~
SAL
~
FAD
-+
Previous
mode
MAGNA BASS EX
on
and
off
1)
Press and hold
th
e [A-M] button
fo
r 2 sec-
onds or longer, then the Bass will extra boost.
Note:
• MAGNA BASS EX effect depend on volume level.
10
08335/08235
Adjusting
the
Bass
1) Press [A-M] button and select "BASS".
2) Turning the [ROTARY] knob clockwise
emphasizes the bass; turning it counterclock-
wise attenuates the bass.
*The factory default setting is "0", (Adjustment
range:
-7
to +7)
3)
When the adjustment is complete, press
[A-M] button several times until the function
mode is reached.
Adjusting
the Treble
1)
Press [A-M] button and select 'TREB".
2)
Turning the [ROTARY] knob clockwise
emphasizes the treble; turning it counter-
clockwise attenuates the treble.
*The factory default setting is "0". (Adjustment
range:
-7
to +7)
3)
When the adjustment is complete, press [A-
M]
button several times until the function
mode is reached.
Adjusting
the Balance
1)
Press [A-M] button and select "BAL".
2) Turning the [ROTARY] knob clockwise
emphasizes the sound from the right speaker;
turning it counterclockwise emphasizes the
sound from the left speaker.
*The factory default setting is "0". (Adjustment
range: L13 to R13)
3)
When the adjustment is complete, press
[A-M] button several times until the function
mode is reached.
Adjusting
the Fader
1)
Press [A-M] button and select "FAD".
2)
Turning the [ROTARY] knob clockwise
emphasizes the sound from the front speak-
ers; turning it counterclockwise emphasizes
the sound from the rear speakers.
*The factory default setting
is
"0". (Adjustment
range: F12 to R12)
3)
When the adjustment is complete, press
[A-M] button several times until the function
mode is reached.
To Next Page
Loading...
Need help?
General
