Setting the Z-enhancer
This unit comes with three types of sound tone
effects stored
in
memory.
Select the one
you
prefer.
*The factory default setting is "Z-EHCR OFF".
Each time you press [Z-EHCR] button, the tone
effect changes
in
the following order.
"Z-ENHANCER 1"
~
"Z-ENHANCER
2"
~
"Z-ENHANCER 3"
~
"Z-EHCR OFF"
~
"Z-ENHANCER
1"
...
• Z-ENHANCER
1:
bass emphasized
• Z-ENHANCER
2:
treble emphasized
• Z-ENHANCER
3:
bass and treble emphasized
• Z-EHCR OFF: no sound effect
Switching the Clock Display
Press and hold the[BND] button, and then press
the [DISP] button to switch between the operation
mode and the clock display.
Setting the Clock
1)
Press and hold the [BND] button, and then
press the [DISP] button to display the clock
display.
2)
Press and hold the [BND} button, and then
press the [DISP] button for 2 seconds or
longer.
3)
Press the
[~>]
button, then set the current
minute.
4) Press the
[<
...] button, then set the current
hour.
5)
Press the [BND] button, then the clock is set.
Notes:
•
If
you select another operation mode while you are
setting the clock, the clock setting operation will be
canceled.
•
If
you remove the vehicle's battery for a check
or
repair, the clock will be reset, so you must set it again.
Screen Saver mode
1)
Press and hold the
[BND]
button, and
then
press the [SS] button to switch on, and off
Screen saver mode
*The
factory default setting is
"55
On".
Radio Mode Operations
FM Reception
For enhanced
FM
performance the
MfiGI-TUHE@
tuner includes signal actuated stereo control and
Multipath noise reduction circuits.
Listening
to
the Radio
1)
Press the [FNC] button to select the radio
mode, then the radio will be on.
2)
To
select a preset band, press the [BND] but-
ton, then select one of the preset bands such
as FM1, FM2, FM3, or AM. Every time the
[BND} button is pressed, the display will
change as:
FM1
~
FM2
~
FM3
-.
AM
~
FM1
3)
Press the
[<
...
][~>]
button, then the station at
which there is a broadcast will be selected
(Seek selection).
Manual Tuning
1) Press the [BND] button, then select FM1,
FM2, FM3 or AM.
2)
Press and hold the [BND] button for 1 second
or longer, then the display will show "MANU",
which means that a manual selection func-
tion is on.
3)
Press the
[<
...
][~>
] button and select the right
station.
Seek Tuning
1)
Press the
[BND]
button, then
select
FM1,
FM2, FM3 or AM.
2)
If
the "MANU" on the display
is
on, press and
hold the [BND] button for 1 second or longer.
When the
"MANU"
display is off, the seek
selection function
is
on.
3)
Press
the
[<
...
][~>]
button, then when it
selects the station
in
which there
is
a broad-
cast,
it
automatically stops.
08335/08235
11
To Next Page
Loading...
Need help?
General
