10
MAX685BT
English
Owner’s manual
Outline of Button and Touchkey Operation
Turning the power on
∗1
Engine ON
position
System check
The CeNET format utilized on this unit is provided
with a system check function. When the system
check function is performed under the following
conditions, the power is automatically turned off.
Press the [SRC] button again.
• When power is first turned on after initial
installation.
• When an external device is connected or
disconnected.
• When Reset button is pressed.
* In addition to the above conditions, the system
check function can be performed from the System
tab menu on the General settings screen.
Note:
*1 These images indicate the buttons to press or
keys to touch.
You can change the media
sources.
or
To Next Page
Loading...
Need help?
General
