2.3.3 The planned route
The planned route is the currently navigated route. Whenever the destination is set, the route is active
until you delete it, reach your destination or suspend navigation. NX405 displays the route in the following
ways:
Symbol Name Description
Current GPS position
and starting point
It is your current position displayed on the map.
x In pedestrian mode it is the GPS position.
x If a vehicle is selected for route calculation and roads are near,
the arrow jumps to the nearest road.
x The dot near the arrow shows the exact GPS position.
Normally, if GPS position is available, the route starts from the current
position. If there is no valid GPS position, NX405 uses the last known
position as the starting point.
Waypoint (intermediate
destination)
It is an intermediate destination of the route before reaching the final
destination.
Destination (end point) It is the final destination of the route.
Route color
The route always stands out with its color on the map, both in daytime
and night color modes.
Streets and roads that
are excluded from the
navigation
You can choose whether you want to use or avoid certain road types
(page 74). However, when NX405 cannot avoid such roads, the route
includes them and shows them in a color that is different from the
route color.
2.3.4 Turn preview and next street
When navigating a route, the top section of the Navigation view shows information about the next route
event (maneuver) and the next street or the next town.
There is a field in the top left corner displaying the next maneuver. Both the type of the maneuver (turn,
traffic circle, exiting freeway, and so on) and its distance from the current position are displayed.
Clarion NX405 English 17
To Next Page
Loading...
Need help?
General
