EN
ENGLISH
-6- FORM NO. 71376A - Clarke
®
American Sanders Operator's Manual (EN) - CE 7 Pro, SE7 Pro, CE7 Pro+, SE7 Pro+
Introduction and Machine Specifications
The models CE and SE 7 were designed for floor sanding where larger machines are impratical or cannot reach.
They are suitable for rough and finish sanding on strip or parquet flooring. They can be used on a wide variety of
wood species including pine, oak, or maple. The added reach enables them to be used under obstructions or
toe-kick. Either model will accept 7" x 7/8" mounting hole or 7" hook and loop abrasive.
Part No. 07170A 07176A 07180A 07175A
Model CE 7 PRO+ SE 7 PRO + SE7 PRO CE7 PRO
V 120 120 120 120
A 12 121212
W 1.3 kW 1.3 kW 1.3 kW 1.3 kW
Hz 60 60 60 60
Cable 25' 14-3 25' 14-3 NA NA
Grey Rubber Grey Rubber
Vibration Exposure 4.9 m/s
2
4.9 m/s
2
4.0 m/s
2
4.0 m/s
2
Sound Emissions 91 dB(A) 91 dB(A) 91 dB(A) 91 dB(A)
Pad Speed 3640/3030 rpm 3640/3030 rpm 3640 rpm 3640 rpm
Abrasive (in/mm) 7/178 Hook & loop 7/178 Hook & loop 7/178 Hook & loop 7/178 Hook & loop
or 7/8" Mounting hole or 7/8" Mounting hole or 7/8" Mounting hole or 7/8" Mounting hole
Air Flow (CFM) 136 136 136 136
Effective Reach 5.24/13.31 3.76/9.55 3.76/9.55 5.24/13.31
@ 3.5" Height (in/cm)
Dimensions (in/cm) 16.61x11.78x12.69 / 15.02x11.78x12.68 / 15.02x11.78x12.68 / 16.6x11.78x12.69 /
42.2x29.932.2 38.2x29.9x32.2 38.2x29.9x32.2 42.2x29.9x32.2
Weight (lbs./kg) 36.5 / 16.6 35.5 / 16.1 33.0 / 15.0 34.0 /15.5
Weight (lbs./kg) 47.5 / 21.6 46.5 / 21.1 39.5 / 18.0 40.5 / 18.4
Dimensions (in/cm) 20x17.25x22.75 / 20x17.25x22.75 / 20x17.25x22.75 . 20x17.25x22.75 /
51x43.8x57.8 51x43.8x57.8 51x43.8x57.8 51x43.8x57.8
Shipping Performance Environmental Electrical
To Next Page
Loading...
Need help?
General
