16
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
RATING PLATE
DUTY CYCLE
This welder is covered by regulations EN60974-1 and EN 50199, where the Duty
Cycle (X) is expressed as a percentage of time the machine may be used in a
given period for a specified welding current.
i.e. When welding at 65 Amps the machine may be used for 6 minutes (60%) in
any10 minute period,
1 Name and address of manufacturer 12 Rated Welding Current Symbol
2 Model Number, / Part Number 13 Conventional Load Voltage Symbol
3 Serial / Batch Number 14 Energy Supply Symbol
4 Welding Power Source 15 Rated Supply Voltage
5 British Standards applied 16 Rated Maximum Supply Current
6 Welding Process Symbol 17 Maximum Effective Supply Current
7 This symbol indicates that the unit is
suitable for carrying out welding
operations in an environment which
has an increased risk of electric
shock.
18 N/A
8 Welding Current Symbol 19 N/A
9 Rated No-load Voltage 20 N/A
10 Range Of Output 21 N/A
11 Duty Cycle Symbol 22 Degree of Protection
To Next Page
Loading...
Need help?
General
