5
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
suitable filter lenses. Proper gloves and
working clothes should be worn at all
times.
• ALWAYS wear a pair of safety
spectacles/goggles when chipping
away slag after welding,. Remember,
ordinary eye glasses are not safety
gasses.
• ALWAYS ensure there is a fire
extinguisher on hand.
• ALWAYS ensure there is adequate
ventilation or extraction in the work
area, as the welding process gives off
toxic fumes.
• ALWAYS ensure that a medical supply is
on hand, and that treatment for burns is
available.
SAFETY SYMBOLS
ENVIRONMENTAL RECYCLING POLICY
Through purchase of this
product, the customer is
taking on the obligation to
deal with the WEEE in
accordance with the WEEE
regulations in relation to the
treatment, recycling & recovery and
environmentally sound disposal of
the WEEE.
In effect, this means that this product
must not be disposed of with general
household waste. It must be
disposed of according to the laws
governing Waste Electrical and
Electronic Equipment (WEEE) at a
recognised disposal facility.
Read this instruction
booklet carefully
before use.
Do not expose to rain.
Wear eye protection Recycle unwanted
materials instead of
disposing of them as
waste. All tools,
accessories and
packaging should be
sorted, taken to a
recycling centre and
disposed of in a manner
which is compatible
with the environment.
Wear protective gloves
Wear a dust mask
To Next Page
Loading...
Need help?
General
