Clevo N750BU User Manual

Disassembly
Removing the Hard Disk Drive 2 - 7
2.Disassembly
Removing the Hard Disk Drive
The hard disk drive can be taken out to accommodate other 2.5" serial (SATA) hard disk drives with a height of 7.0mm
(h). Follow your operating system’s installation instructions, and install all necessary drivers and utilities (as outlined in
Chapter 4 of the User’s Manual) when setting up a new hard disk.
Hard Disk Upgrade Process
Figure 3
HDD Assembly
Removal
a. Remove the screws.
b. Remove the screws.
c. Remove the bottom
cover.
d. Locate the HDD assem-
bly.

HDD System Warning
New HDD’s are blank.
Before you begin make
sure:
You have backed up
any data you want to
keep from your old
HDD.
You have all the CD-
ROMs and FDDs re-
quired to install your op-
erating system and
programs.
If you have access to
the internet, download
the latest application
and hardware driver up-
dates for the operating
system you plan to in-
stall. Copy these to a re-
movable medium.
1. Turn off the computer, turn it over to remove the battery (page 2 - 5) and keyboard (page 2 - 6).
2. Remove screws - underneath the keyboard (Figure 3a).
3. Remove screws - (Figure 3b).
4. Lift the bottom cover up from point (Figure 3c).
5. The hard disk drive will be visible at point (Figure 3d
).
1
3
4
12
13
14
15
a. b.

15. Bottom Cover
•12 Screws
10
11
2
3
4
5
9
7
8
15
c.
12
6
14
c.
13
1

Clevo N750BU Specifications

General

Brand	Clevo
Model	N750BU
Category	Laptop
Language	English