Cobra 25 LX User Manual

PUSH &
HOLD
Setting Dynamike®
This controls the microphone sensitivity
(outgoing audio level).
To Transmit
13
To Transmit
12
Setting
Dynamike
®
Caution!
Be sure the antenna is properly
connected to the radio before
transmitting. Prolonged trans-
mitting without an antenna,
or a poorly matched antenna,
could cause damage to the
transmitter.
Be sure to read the F.C.C. Rules
and Regulations included with
this unit before transmitting.
Operation
Operation
3
Select desired channel.
1
Initially, set fully clockwise so that maximum
voice volume is available. Dynamike may
have to be reduced in some conditions.
2
Transmit
Push and hold mic button to transmit.
Transmitter is now activated. When transmit-
ting, hold the microphone two inches from
your mouth and speak in a clear, normal voice.
Release to receive.
SIG
+30dB
1
1
2
3
4
TX PWR
3
5
7
9
MEM NB
TX
RX
VOL SQ
OFF
DYNAMIKE
MIN
RF GAIN
MIN
MAX
M
E
N
U
P
U
S
H
E
N
T
E
R
SCAN / M SCAN
DIM / ESC
CB / PA
NB
CH9 / 19
SIG +30dB
1
1
2
3
4
TX PWR
3
5
7
9
MEM NB
TX
RX
VOL SQ
OFF
DYNAMIKE
MIN
RF GAIN
MIN MAX
M
E
N
U
P
U
S
H
E
N
T
E
R
SCAN / M SCAN
DIM / ESC
CB / PA
NB
CH9 / 19
25LX_MANL.indd 12-13 11/15/11 9:43 AM
For Sales Information Please Contact RoadTrucker Inc (www.RoadTrucker.com)
8312 Sidbury Rd.; Wilmington, NC 28411 - (800) 507-0482 / (910) 686-4281

Cobra 25 LX Specifications

General

Brand	Cobra
Model	25 LX
Category	Receiver
Language	English