Advanced Features
35
Advanced Features
34
Ringer/Vibrate Modes
Your Microtalk 3 will signal you that there is an
incoming transmission with either a tone or a
vibration or both.To set for Ringer/Vibrate:
Rotate ON - OFF Volume Control clockwise.
An audible “tone” will indicate the unit is on and
then the LCD will go through a 3 second self-test
and then go to operational mode.
Ringer/Vibrate
Modes
2
1
3
continued
Channel
Function
Push and release button until icon
flashes.
Push and release buttons until icon
appears for ringer mode.
FRS300.MANUAL.qx 10/2/98 12:39 PM Page 40