37
03
Connect to mains power supply ensuring the cable is not bent.
Lift the oven into housing unit using the 2 handles at the sides of the appliance. Do not lift
it with the door handle, otherwise, the glass door might shatter.
Caution!
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualied persons in order to avoid a hazard.
04
Once the oven has been lifted into place inside the housing unit, use the 2 holes located
within the sides of the metal casing of the oven to secure it. Secure with the 2 screws [F].
[F] x 2
Handling and xing the oven
To Next Page
Loading...
Need help?
General
