2050-M
PARTS LIST FOR LOWER CHUCK FURNISHED AS A SUBSTITUTE FOR THE OLD
STYLE SQUARE JAWED TYPE USED ON MODELS i03.0403 AND 103.0404
' I
31102
,, r
11617
o ®
18518 18519
X- 1400
©
12464
r-------_
18938
NO.
31102
31617
18917
18518
PART NAME
Chuck Assembly Complete
Chuck Housing
Blade Centering Cover
Socket Head Clamp Screw
No. PART NAME
18519 Slotted Head Set Screw
X-1400 Allen Wrench
12464 Threaded Plug
18938 Chuck Shoe
INSTALLATION INSTRUCTIONS
i. Unscrew and remove the !ower chuck, holding the washers under the top of the
boot in place.
2. Remove the washers and nut_ No. 12512, from the old chuck stem and place them
on the new chuck. (See sketch)
3- Screw the plug, No. 12464, into the lower guide rod turning it with a small
screw driver until it seats. (See sketch)
4. Assemble chuck to tool as per following sketch:
31102
L j______"/ 12512
Flat Washer .... --'2'-_-_---_--_---- Lock Washer
k
/i .! b Boot
/ JJ;....'t
IMPORTANT NOTICE
This new style chuck may be used to hold machine files or sabre saws. To insert
these tools first remove the blade centering cover, No. 18917, and chuck shoe#
No. 18938, by removing the screws 18518, 18519. Use only the set screw 18519 to
hold files or sabre saws. For regular blades use Allen wrench for locking the
blade in chuck. Whenever re-assembling chuck keep the relative position of 18518,
18519 and 18938 the same as originally assembled.
To Next Page
Loading...
Need help?
General
