Sears Recommends The Following Accessories*
Item Cat. No.
Saw blades
(10" diameter with 5/8" hole) ......... See Catalog
Leg Set Caster ....................... 9-22221 or 9-22222
Sandin g Drum .......................................... 9-25246
Drill Chuck and Key .......................... See Catalog
Dust Collector .................................... See Catalog
Molding Head Guard 8". .................... See Catalog
Taper Jig ............................................. See Catalog
Auxiliary Table Cover ........................ See Catalog
Miter Square ....................................... See Catalog
Extension Table .................................. See Catalog
Satin Cut Dado
7". ....................................................... See Catalog
8". ....................................................... See Catalog
8" Carbide .......................................... See Catalog
Standard Cut Dado
8". ....................................................... See Catalog
Adjustable Dado
7" - 24 Tooth Carbide ........................ See Catalog
7" - 32 Tooth Carbide ........................ See Catalog
7" - 16 Tooth Carbide ........................ See Catalog
8" - 48 Tooth Carbide ........................ See Catalog
Molding Heads
7" Bits Not Included ........................... See Catalog
7" - 27 Piece Set ................................. See Catalog
7" - 15 Piece Set ................................. See Catalog
Sanding Wheel - 10". ......................... See Catalog
Books
Power Tool Know How Handbook .......... 9-29117
Guards
Lower Retractable Guard
0_or 90 ° Crosscut Only) ....................... 9-29009
* Recommended means that these accessories
are designed to fit this radial ann saw. Read and
follow accessory instructions on their use and
limitations.
Sears may recommend other accessories not
listed in the manual. See your nearest Sears store
or Catalog department for other accessories.
Do not use any accessory unless you have re-
ceived and read complete instructions for its use.
56