Craftsman 113.198210 User Manual

contents
Page
Guarantee .................................... 2
General Safety Instructions for Power Tools .... 2
Additional Safety Instructions for Radial Saws oo 3
Glossary of Terms for Woodworking ........... 6
Electrical Connections .......................... 7
Assembly and Alignment ........................ 9
Unpacking and Preassembly ................ 10
Alignment Procedure ....................... 18
Page
Location and Function of Controls ............ 29
Basic Saw Operations ........................... 33
Adjustments to Compensate for Wear ......... 39
Trouble Shooting .............................. 43
Maintenance and Lubrication .................. 49
Recommended Accessories ................... 50
Repair Parts ................................. 52
,,i,,,, ' ' ................ _,,_,,i,, i,,,i, =r,,i.......... i...... i " " _ "" ........... i,,, ,,, ,,,,,i,
o=1 (,rt
=
o,}-_
,=_
assembRyand aRignment
TOOLS NEEDED
7/16" WRENCH
1/2" WRENCH
3/4" WRENCH
MEDIUM SCREWDRIVER
#2 PHILLIPS SCREWDRIVER
PLIERS
3/4" SOCKET
9/16" SOCKET
7/16" SOCKET
SOCKET EXTENSION
SOCKET WRENCH
FRAMING SQUARE
PENCIL
1/8" HEX "L" WRENCH
3/16" HEX "L" WRENCH
FRAMING SQUARE MUST BE TRUE,
Check its accuracy as illustrated below
CHECKING ACCURACY OF CHECKING ACCURACY OF
INSIDE OF SQUARE OUTSIDE OF SQUARE
REAR EDGE OF FRONT TABLE
(FENCE, SPACER AND BACK _ FENCE
EIOARDS REMOVED) f-"--=_/ ....
DRAW LIGHT LiNE ON _ _ / DRAW LIGHT L|NE ON
TABLE ALONG THIS EDGE I j_'i--TABLE ALONG THtS EDGE
t_lU LJIL J
SHOULD 8E NO GAP OR SHOULD BE NO GAP OR
OVERLAP HERE WHEN OVERLAP HERE WHEN
SQUARE IS FLIPPED OVER SQUARE iS FLIPPED OVER
tN DOTTED POSITION IN DOTTED POSITION
9

Craftsman 113.198210 Specifications

General

Brand	Craftsman
Model	113.198210
Category	Saw
Language	English