EasyManuals Logo
Home>Craftsman>Lawn Mower>dlt 3000

Craftsman dlt 3000 User Manual

Craftsman dlt 3000
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
MUFFLER
Inspect and replace corroded muffler and
spark arrester (if equipped) as it could cre-
ate a fire hazard and/or damage.
SPARK PLUG(S)
Replace spark plug(s) at the beginning
of each mowing season or after every
100 hours of operation, whichever occurs
first. Spark plug type and gap setting are
shown in "PRODUCT SPECIFICATIONS"
section of this manual.
IN-LINE FUEL FILTER
The fuel filter should be replaced once
each season. If fuel filter becomes
clogged, obstructing fuel flow to carbu-
retor, replacement is required.
1. With engine cool, remove filter and
plug fuel line sections.
2. Place new fuel filter in position in fuel
line with arrow pointing towards carbu-
retor.
3. Be sure there are no fuel line leaks and
clamps are properly positioned.
4. Immediately wipe up any spilled gaso-
line.
Clamp_ Clamp
Fuel Filter
CLEANING
Clean engine, battery, seat, finish, etc.
of all foreign matter.
Keep finished surfaces and wheels free
of all gasoline, oil, etc.
Protect painted surfaces with automotive
type wax.
We do not recommend using a garden
hose or pressure washer to clean your
tractor unless the engine and transmis-
sion covered to keep water out. Water
in engine or transmission will shorten the
usful life of your tractor. Use compressed
air or a leaf blower to remove grass, leaves
and trash from tractor and mower.
22

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Craftsman dlt 3000 and is the answer not in the manual?

Craftsman dlt 3000 Specifications

General IconGeneral
BrandCraftsman
Modeldlt 3000
CategoryLawn Mower
LanguageEnglish

Related product manuals