XLS Series Power Amplifiers
page 14
Operation Manual
3.3 Back Panel Controls
and Connectors
G. Power Connector
H. Circuit Breaker
Provides overload protection.
I. Balanced XLR Inputs
Two 3-pin female XLR input connectors are
provided (one per channel).
J. Fans
Provide front-to-back forced airflow for cool-
ing.
K. 5-Way Binding Post Output Jacks
One pair per channel; accept banana plugs,
spade lugs or bare wire. Note: Binding post
outputs on European models come with safety
plugs installed to prevent European power-cord
plugs from being inserted. The top & bottom
entry positions for these connectors should
therefore be used with European models.
L. 4-Pole Speakon Output Connector
One connector is used for the two output chan-
nels. It accepts a 4-pole Speakon connector.
See Page 6, Figure 2.5 and Table 1 for connec-
tor wiring.
3 Operation
Figure 4.1 Back Panel Controls and Connectors
To Next Page
Loading...
Need help?
General
