Cub Cadet GT 2542 User Manual

45
OPTIONAL EQUIPMENT AND ACCESSORIES
When you purchased your tractor, you probably had it
completely equipped for your particular needs at the
time. However, later you may wish to obtain optional
equipment or accessories. These items and other
allied equipment can be purchased from, and installed
by, your authorized Cub Cadet dealer.
The tractor is used for so many different types of work,
and because it is called on to operate under so many
different conditions, a variety or equipment is available
to adapt it to the requirements of the user. Refer to the
attachment guide for a complete description of
equipment and required components that can be
utilized with your tractor.
LUBRICATION
WARNING: The service life and reliability of any machine depends upon the care it is given.
Proper lubrication is a very important part of that care. This lubrication schedule reflects the
minimal requirements to maintain the equipment. More frequent inspections and maintenance is
preferable.
NOTE: We do not recommend the use of a pressure
washer or garden hose to clean your unit. They may
cause damage to electrical components; spindles;
pulleys; bearings; or the engine. The use of water will
result in shortened life and reduce serviceability.
Using the lubrication illustration as a guide, make
certain that all lubrication fittings are installed and
functioning.
Be sure all fittings are free from dirt and paint so the
lubricant is certain to enter the bearing.
Using a pressure lubricating gun, always force the
lubricant through the full length of each bearing until it
emerges at the end, carrying with it the worn lubricant
and any dirt that may have entered the bearing.
Miscellaneous working parts not provided with
lubrication fittings should be oiled regularly with a good
grade of lubricating oil.
Always lubricate the tractor thoroughly before taking it
to a remote location for a prolonged period of time.
Lubricant is cheap. Use plenty of it. Worn parts can be
expensive to replace.
Keep your supply of lubricating oil and grease stored in
clean containers, and covered to protect from dust and
dirt.
Keep the lubricating gun nozzle clean and wipe dirt
from the grease fittings before lubricating.
The symbols in the illustrations indicate the method of
application and the hourly intervals to apply the
lubricant.
Use a pressure lubricating gun
and apply 251H EP grease (or
equivalent No. 2 multi-purpose
lithium grease) sufficient to flush
out the old grease and dirt.
Lubricate at the hourly intervals
indicated on the symbols.
Dipstick, use to check engine and
transmission oil before each use.

Cub Cadet GT 2542 Specifications

General

Brand	Cub Cadet
Model	GT 2542
Category	Lawn Mower
Language	English