MODEL GT 2542 SERIES 2500 20 HP KOHLER
Engine Oil Requirements approx. . . 4 pints Part No.
Cub Cadet engine oil
Ambient temperature viscosity (Grade SG,SH,SJ or higher)
Above +32°F SAE 10W30
Below +32°F SAE 5W20 or 5W30
737-3030A (10W30)
737-3049 (5W30)
Air Filter Requirements Part No.
Clean air filter per instructions
in your Operator’s Manual . . . .
under Maintenance - Air cleaner.
Cartridge
KH-47-083-03
Foam
Pre-cleaner
KH-24-083-02
Engine Oil Filter Requirements Part No.
Change every 100 hours KH-12-050-08
Gap Requirements Part No.
.030 inch gap 759-3336
Oil Filter Requirements) Part No.
Change every 100 hours 923-3014
Transmission Oil Requirements approx. . . 6 qts Part No.
Check before each use
1 quart
1 gallon
737-3120
737-3121
Deck Blade Belt Tractor to Deck Belt
Model Part No. Model Part No.
42" Deck 954-3073 42" Deck 754-04041
Mower Deck Blade Part No.
42" Deck 3 in 1 Blade 759-3830 (2)
MAINTENANCE PARTS CHART
ENGINE OIL
AIR FILTER
CARTRIDGE
FOAM
PRE-CLEANER
ENGINE OIL FILTER
SPARK PLUG
TRANSMISSION OIL
FILTER
TRANSMISSION
OIL
BELTS
BLADES
To Previous Page
Loading...
Need help?
General
