52
Installing and Removing the Infant Carrier
Installing the Infant Carrier Only Using Lap/Shoulder Belts
!
WARNING! DEATH or SERIOUS INJURY can occur.
• NEVER install this child restraint using a non-locking vehicle lap shoulder belt. A locking
clip must be used with a vehicle belt that DOES NOT LOCK. Call CYBEX Customer
Care at 1-877-242-5676 to obtain a locking clip.
• ALWAYS have the handle locked while using this child restraint in a vehicle.
• NEVER recline back rest when using carrier in vehicle.
1. Position the Infant Carrier on a rear
vehicle seat with the foot end towards
the backseat, push it rmly against the
vehicle seat.
2. Route only the vehicle lap belt under the
INFANT CARRIER BELT GUIDES and
BUCKLE THE BELT.
CLICK!
qq
ww
To Next Page
Loading...
Need help?
General
