Cybex Platinum SOLUTION Z-FIX User Guide

8
FIRST INSTALLATION
The car seat consists of a booster seat (1) and a backrest (2).
The backrest integrates a combined height-adjustment of the
headrest and width-adjustment of the shoulder parts. Only the
combination of these two parts provides best protection and
comfort to your child.
Connect the backrest (2) to the booster (1) by hooking the
guide lug (4) on the axis (5) of the booster (1).
Insert the “Linear Side-impact Protection” pads (L.S.P.) on
both sides of the shoulder rest into the appropriate installation
holes (6). Push the pads slightly downwards until you hear
them, “click“ in.
NOTE! Please keep the instruction manual close by for future
reference by storing it in the pocket (3) in the front of the seat.
!
WARNING! Make sure to read, understand and follow
the instruction manual.
!
WARNING! The parts of the CYBEX Solution Z-fix
must not be used alone or in combination with boosters,
backrests or headrests from other manufacturers or
from different product series. In such instances, the
certification expires immediately. Misapplication can
lead to serious injury or death of your child. Please keep
these instructions for future reference.
!
WARNING! Always ensure that the individual
components of the child seat are never compressed
or jammed (e.g. by jamming in the car door or when
adjusting the back seat).
1
2
4
5
3
6

Cybex Platinum SOLUTION Z-FIX Specifications

General

Brand	Cybex Platinum
Model	SOLUTION Z-FIX
Category	Car Seat
Language	English