D-Link COVRC1200A1 User Manual

56D-Link COVR-C1203 User Manual
Section 3 - Conguration
Static Routes
IPv4
The Static Routes section allows you to dene custom routes to control how
trac moves around your network.
In the Features menu on the bar on the top of the page, click Static Routes.
To congure IPv6 rules, click IPv6 and refer to IPv6 on page 57. To return to
the main IPv4 static routes page, click IPv4.
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the Add Route button. Click Save when you are done.
If you edit or create a rule, the following options will appear:
Name: Enter a name for the route.
Destination
Network:
Enter the destination IP address of this route.
Mask: Enter the subnet mask of the route.
Gateway: Enter your next hop gateway to be taken if this route is used.
Metric: The route metric is a value from 1 to 16 that indicates the cost of using
this route. A value of 1 is the lowest cost and 16 is the highest cost.
Interface: Select the interface that the IP packet must use to transit out of the
router when this route is used.
Click Apply when you are done.

D-Link COVRC1200A1 Specifications

General

Brand	D-Link
Model	COVRC1200A1
Category	Wireless Router
Language	English