D-Link COVRC1200A1 User Manual

72D-Link COVR-C1203 User Manual
Section 5- Connecting a Wireless Client
Connect to a Wireless Client
WPS Button
The easiest way to connect your wireless devices to your Covr Wi-Fi network is with WPS (Wi-Fi Protected Setup). Most wireless
devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers, and cameras will have a WPS button
that you can press to connect to the Covr Point. Please refer to your user manual for the wireless device you want to connect to
make sure you understand how to enable WPS. After consulting your device's manual, follow the steps below:
Step 2 - Within 120 seconds, press the WPS button on your wireless device (or launch the software utility and start the WPS
process).
Step 1 - Press the WPS button on the nearest Covr Point for about 1 second. The COVR LED on the front will start to blink white.
Step 3 - Allow up to 1 minute for your connection to be congured. Once the COVR LED stops blinking, you will be connected
and your wireless connection will be encrypted with WPA2.
WPS Button

D-Link COVRC1200A1 Specifications

General

Brand	D-Link
Model	COVRC1200A1
Category	Wireless Router
Language	English