D-Link DAP-1325 User Manual

DAP-1325 N300 Wi-Fi Range Extender
User Manual
Installation and Connection
Menu Sections
To configure the extender use the menu in the left part of the page.
In the Initial Configuration section you can run the Initial Configuration Wizard. The Wizard
allows you to configure the extender for operation in the needed mode and specify all parameters
necessary for getting started (for the description of the Wizard, see the Initial Configuration
Wizard section, page 32).
The pages of the Statistics section display data on the current state of the extender (for the
description of the pages, see the Statistics section, page 40).
The page of the Connections Setup section is designed for configuring basic parameters of the
LAN interface of the extender (for the description of the page, see the Connections Setup section,
page 44).
The pages of the Wi-Fi section are designed for specifying all needed settings of the extender's
wireless network (for the description of the pages, see the Wi-Fi section, page 49).
The page of the Advanced section is designed for adding DNS servers to the system (for the
description of the page, see the Advanced section, page 72).
The page of the Firewall section is designed for configuring the MAC filter of the extender (for the
description of the page, see the Firewall section, page 74).
The pages of the System section provide functions for managing the internal system of the
extender (for the description of the pages, see the System section, page 76).
To exit the web-based interface, click the Logout line of the menu.
Page 30 of 92

D-Link DAP-1325 Specifications

General

Type	Network repeater
WPS push button	Yes
Ethernet LAN data rates	10, 100 Mbit/s
Maximum transfer distance	- m
Antenna type	External
Antennas quantity	2
Wi-Fi standards	802.11g, Wi-Fi 4 (802.11n)
Security algorithms	WPA, WPA2, WPS-PBC
Networking standards	IEEE 802.11g, IEEE 802.11n, IEEE 802.3ab, IEEE 802.3u
Wi-Fi data rate (max)	300 Mbit/s
Ethernet LAN (RJ-45) ports	1
Certification	FCC, IC, CE, RCM, IDA, CB, LVD, UL, WPS
Product color	Grey, White
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz
Sustainability certificates	RoHS
Storage temperature (T-T)	-20 - 65 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %

Weight and Dimensions

Depth	50.7 mm
Width	97.9 mm
Height	48.7 mm
Weight	97 g