36D-Link DAP-1365 User Manual
Section 3 - Conguration
Settings
Extender Settings
This page lets you congure the settings for the DAP-1365’s extended wireless network. To access this page, click the Settings drop-
down menu at the top of the page, and select Extender. Click Save to apply the settings and return to the home page.
Enable or disable this network by toggling this slider.
This is the name of the DAP-1365’s extended network. If using Wi-Fi, the
DAP-1365 will rebroadcast the uplink router’s Internet connection under this
SSID. You may also manually set the SSID of the extended network.
Select the type of wireless security you wish to use for the extended network.
Choose None or WPA/WPA2 Personal.
Enter the password or network key that you wish to use for the extended
network.
Select Auto or any channel from 1 to 13 for use with this network.
Select Auto 20/40 or 20 MHz for the bandwidth you wish this network to use.
Enable or disable HT20/40 coexistence by toggling the slider.
Status:
Wi-Fi Name
(SSID):
Security:
Password:
Wi-Fi
Channel:
Channel
Width:
HT20/40
Coexistence:
2.4 GHz Extended Wi-Fi
Existing Network
Select the type of existing network, either Ethernet or Wi-Fi you want the
DAP-1365 to connect to.
Existing
Network:
To Next Page
Loading...
Need help?
General
