D-Link DAP-1530 User Manual

37D-Link DAP-1530 User Manual
Section 3 - Conguration
System
This page allows you to save or restore your system conguration, reset, or reboot the DAP-1530. To access this page, click the
Management drop down menu at the top of the page, and select System.
Save Settings To Local
Hard Drive
Save the system settings onto a le to the local hard drive. You
will then see a le dialog where you can select a location and
enter a le name for the conguration le.
Load Settings From
Local Hard Drive
Load the system settings from a previously saved le on the
local hard drive. Click the Restore button that appears after
loading the system settings le to load the settings.
Restore to Factory
Default Settings
Restore the system settings to factory default settings. This
will erase all currently stored settings.
Reboot the Device Click Reboot to reboot the DAP-1530.

D-Link DAP-1530 Specifications

General

Type	Network repeater
WPS push button	Yes
Ethernet LAN data rates	10, 100 Mbit/s
Antenna type	External
Antennas quantity	2
Wi-Fi band	Dual-band (2.4 GHz / 5 GHz)
Wi-Fi standards	802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Cabling technology	10/100Base-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11k, IEEE 802.11n, IEEE 802.11v, IEEE 802.3ab
Wi-Fi data rate (max)	433 Mbit/s
Ethernet LAN (RJ-45) ports	1
Storage temperature (T-T)	-20 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Flash memory	8 MB
Internal memory	64 MB
Certification	FCC, CE, IC, UL
Product color	Grey, White
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	48.7 mm
Width	50.7 mm
Height	97.9 mm
Weight	116 g