EasyManuals Logo
Home>D-Link>Extender>DAP-1530

D-Link DAP-1530 User Manual

D-Link DAP-1530
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #51 background imageLoading...
Page #51 background image
48D-Link DAP-1530 User Manual
Section 6 - Troubleshooting
Congure your Internet settings:
Go to the Control Panel. Search for Internet Options. From the Security tab, click the button to restore the settings to their defaults.
Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button. Make sure nothing
is checked. Click OK.
Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
Close your web browser (if open) and open it.
Access the web management interface. Open your web browser and enter the address of your extender
(http://dlinkap.local) in the address bar. This should open the login page for your web management. If the DAP-1530 is not
connected to an uplink router, you can try accessing the web interface using the default IP address http://192.168.0.50.
If you still cannot access the conguration, unplug the extender from the power outlet for at least 10 seconds and plug it back
in. Wait about 30 seconds and try accessing the conguration. If you have multiple computers, try connecting using a dierent
computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your extender. Unfortunately this process will change all your settings back to the
factory defaults.
To reset the extender, locate the reset button (hole) on the underside panel of the unit. With the extender powered on, use
a paperclip to hold the button down for 10 seconds. Release the button and the extender will go through its reboot process
(indicated by the LED turning red). Wait about 30 seconds to access the extender. The default IP address is
http://dlinkap.local. When logging in, the username is admin and leave the password box empty.

Other manuals for D-Link DAP-1530

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the D-Link DAP-1530 and is the answer not in the manual?

D-Link DAP-1530 Specifications

General IconGeneral
TypeNetwork repeater
WPS push buttonYes
Ethernet LAN data rates10, 100 Mbit/s
Antenna typeExternal
Antennas quantity2
Wi-Fi bandDual-band (2.4 GHz / 5 GHz)
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Cabling technology10/100Base-T(X)
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11k, IEEE 802.11n, IEEE 802.11v, IEEE 802.3ab
Wi-Fi data rate (max)433 Mbit/s
Ethernet LAN (RJ-45) ports1
Storage temperature (T-T)-20 - 70 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 90 %
Operating relative humidity (H-H)10 - 90 %
Flash memory8 MB
Internal memory64 MB
CertificationFCC, CE, IC, UL
Product colorGrey, White
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
Weight and Dimensions IconWeight and Dimensions
Depth48.7 mm
Width50.7 mm
Height97.9 mm
Weight116 g

Related product manuals