D-Link DAP-1955 User Manual

11D-Link DAP-1955 User Manual
Section 2 - Installation
Assessing Uplink Signal Strength
Poor Ok Good Best
The Status LED/WPS button will turn solid green when the DAP-1955 has connected successfully to a wireless network and is
extending that network. If the Signal Indicator LED has a single orange bar after the connection process has nished, the DAP-1955
has established a poor quality connection. The more lit bars on the Signal Indicator LED, the better the wireless signal. To improve
the connection quality, the DAP-1955 should be relocated closer to the source wireless router. Using the 5 GHz extension network
is recommended in order to achieve the fastest wireless speeds. If the extender has been congured as an Access Point and is
connected via Ethernet cable to an uplink network, the Signal Indicator LED will not be lit.

D-Link DAP-1955 Specifications

General

Brand	D-Link
Model	DAP-1955
Category	Extender
Language	English