D-Link DAP-X3060 User Manual

19D-Link DAP-X3060 User Manual
Section 3 - Conguration
WPA Mode:
Cipher Type:
Group Key Update
Interval:
RADIUS Server:
RADIUS Port:
RADIUS Secret:
Accounting Mode:
Accounting Server:
Accounting Port:
Accounting Secret:
Save:
When WPA-Enterprise is selected, you must also
select a WPA mode from the drop-down menu:
AUTO (WPA or WPA2) or WPA2 Only or WPA3 only.
When WPA-Enterprise is selected, you must also
select a cipher type from the drop-down menu:
Auto, AES, or TKIP.
Select the interval during which the group key
will be valid. 3600 is the recommended value as
a lower interval may reduce data transfer rates.
Enter the IP address of the RADIUS server to be
used in authenticate.
Enter the RADIUS port.
Enter the shared secret to be used between the
radius server and the DAP to authenticate.
Click the drop-down menu to enable or disable
the accounting mode.
Enter the IP address of the accounting server.
Enter the accounting port.
Enter the accounting secret.
Save the updated configuration. Click
Conguration > Save and Activate to make
changes permanent.

D-Link DAP-X3060 Specifications

General

Brand	D-Link
Model	DAP-X3060
Category	Wireless Access Point
Language	English