D-Link DAP-X3060 User Manual

8D-Link DAP-X3060 User Manual
Section 2 - Installation
Basic Installation
Hardware Setup
To power on the DAP-X3060, you can use ONE of the following methods:
1. Plug one end of your Ethernet cable into theLAN(PoE) port of the DAP-X3060, and the other end into a port on a 802.3at PoE switch.
2. Purchase a DPE-301GI PoE injector separately if you need to connect the access point without a 802.3at PoE Switch.
Congure the access point
To set up and manage the DAP-X3060, use one of the following methods:
1. Connect the access point and your computer to the same PoE switch. Manage the access point from the computer.
Enter dapx3060.local in the address eld of your browser.
Log in to the Administration Web pages. The default login information is:
Username: admin
Password: admin
2. Connect the access point and your computer via DPE-301GI PoE injector. Manage the access point from the computer.
Enter dapx3060.local in the address eld of your browser.
Log in to the Administration Web pages. The default login information is:
Username: admin
Password: admin
OR
Computer
802.3at PoE Switch
DAP-X3060
Computer
PoE Injector
Power
Adapter

D-Link DAP-X3060 Specifications

General

Brand	D-Link
Model	DAP-X3060
Category	Wireless Access Point
Language	English