D-Link DAP-X3060 User Manual

40D-Link DAP-X3060 User Manual
Section 3 - Conguration
Static IP (Manual) is chosen here. Choose this
option if you do not have a DHCP server in
your network, or if you wish to assign a static
IP address to the DAP-X3060. When Dynamic
IP (DHCP) is selected, the other elds here will
be grayed out. Please allow about 2 minutes
for the DHCP client to be functional once this
selection is made.
Assign a static IP address that is within the IP
address range of your network.
Enter the subnet mask. All devices in the
network must share the same subnet mask.
Enter the IP address of the gateway/router in
your network.
Enter a DNS server IP address. This is usually
the local IP address of your gateway/router.
Click to edit the selected entry.
Click to delete the entry.
Click to save the updated configuration.
To make the updates permanent, click
Conguration > Save and Activate.
IP Address:
Subnet Mask:
Gateway:
DNS:
Edit:
Delete:
Save:

D-Link DAP-X3060 Specifications

General

Brand	D-Link
Model	DAP-X3060
Category	Wireless Access Point
Language	English